ConfigureTerminal.com all software bundle
I am offering you almost all our software for a ridiculously low price... get the following:
1) VPN Config Generator - create VPNs in seconds
2) Initial Router Config Generator - setup firewalls, NAT, Wireless and ...
3) CCIE Command Memorizer and other command memorizers...
4) Includes ... Read More ...
Auto Install using Frame Relay
My Network Example:
NB!! Will only work over first Serial interface on the router!!!
Note: The following is needed: Just need TFTP Server - no DHCP
Configuration files on TFTP Server
OR these files:
================================================
R1 Config:
================================================
hostname r1
!
interface FastEthernet0/0
ip address 10.1.1.100 255.255.255.0
!
interface Serial0/0
bandwidth 64
ip address 10.1.2.1 255.255.255.252 <===== Mask can be /24 etc
ip helper-address 10.1.1.1 <===== IP Helper address pointing to
TFTP server
encapsulation frame-relay
clockrate 64000
frame-relay map ip 10.1.2.2 102 broadcast <===== Just a normal Frame-Relay Map Statment
!
router eigrp 1
network 10.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
================================================
R2 Output:
================================================
Note - still default router:
But WAIT!!!!!!!!!!!!!!!!!
I hope that this has been beneficial to you.
To your success,
David Bombal